ACTE UK > Manufacturers & Data > High Flying

 

High_Flying.jpg

High-Flying Electronics specialise in wireless communications products, specifically the development, manufacture and marketing robust high quality embedded Wi-Fi, Bluetooth and combination modules. Additionally they provide total IOT solutions (Cloud Servers and APP) for customers.

With High-Flying’s creative design, rapid development cycles and aggressive cost engineering, customers can greatly reduce their wireless product development cycle times, and remove the uncertainties surrounding design, test, certification and manufacturing of products.
 
 

Manufacture web site:

http://www.hi-flying.com

Product Range

Click to view portfolio

Products and documentation


High Performance Series with http web-page configuration
 
HF-A11 & HF-A11-SMA
802.11b/g/n modules with PCB header mounting. Full TCP/IP stack with UART interface + Ethernet. Operates as WiFi Client, Access Point or combo device. Supports router / bridge modes with Ethernet. Small 25 x 40mm footprint, single 3.3V supply, On-board chip antenna or optional I-PEX or SMA connectors.
 
 

Datasheet_LNK.png

HF-A11-SMT
Surface mounted 802.11b/g/n module with full TCP/IP stack, UART interface + Ethernet. Operates as WiFi Client, Access Point or combined device. Supports router / bridge modes with Ethernet. Small 25 x 40mm footprint, single 3.3V supply, On-board chip antenna or I-PEX antenna connectors.
 
 

Datasheet_LNK.png

 
 
Low Power Series with http configuration, SDK, GPIO control & smart-link for handhelds
 
LPB100
802.11b/g/n modules with full TCP/IP stack & UART interface. Supports WiFi Client, Access Point or combo mode. Custom High-Flying microprocessor and power saving scheme for very low current consumption. Small surface mount 23 x 37mm footprint, single 3.3V supply, On-board chip or external antenna via I-PEX or SMA connectors.
 
 

Datasheet_LNK.png

LPB100U
802.11b/g/n modules with full TCP/IP stack with UART and USB(1.1) interfaces. Supports WiFi Client, Access Point or combo mode. Custom High-Flying microprocessor and power saving scheme for low current consumption. Small surface mount 23 x 37mm footprint, single 3.3V supply, On-board chip or I-PEX connector for external antenna.
 
 

Datasheet_LNK.png

 
LPB200
802.11b/g/n modules with full TCP/IP stack, UART & USB 2.0 interfaces. Supports WiFi Client, Access Point or combo mode. Based upon Marvell Solutions for Smart Energy and Home/Building Automation with improved power management. Small surface mount 23 x 37mm footprint, single 3.3V supply, On-board chip or external antenna via I-PEX connector.
 
 

Datasheet_LNK.png

 
 
Tiny Series with GPIO & PWM control from the network & smart-link control
 
LPT100
802.11b/g/n modules with full TCP/IP stack & UART interface. Supports WiFi Client, Access Point or combo mode. Custom High-Flying microprocessor and power saving scheme for very low current consumption. Tiny 22 x 13.5mm footprint with 10-way header interface, single 3.3V supply, I-PEX external antenna connector with optional antenna or direct-connect option.
 
 

Datasheet_LNK.png

LPT100S
802.11b/g/n modules with full TCP/IP stack & UART interface as per LPT100. Enhanced PWM interface & copper-line antenna pre-connected or optional pads for direct antenna connection.
 
 
 
 
LPT200
802.11b/g/n modules with full TCP/IP stack & UART interface. Supports WiFi Client, Access Point or combo mode. Custom High-Flying microprocessor and power saving scheme for very low current consumption. Tiny Surface-Mount 22 x 13.5mm footprint, single 3.3V supply, on-board antenna or solder pad for external antenna connection.
 
 

Datasheet_LNK.png

 
Bluetooth Low Energy Modules
 
HF-BL100 Bluetooth LE
Small, low-cost BLE module with transparent UART data communication. Very Low Power modes and wide supply input range of 1.9 to 5.0v. On-board ADC & GPIO with PWM output. CE, FCC & BQB certificated.
 
 

Datasheet_LNK.png

 
 
Ready-to-use WiFi Devices
 
DTU-H100
Self-contained 802.11b/g/n WiFi adpater. RS232/485 + Ethernet interface converter to WiFi (AP, Client or both). Multiple protocol support, configuration by AT command or http interface. Sturdy metal housing, 5 to 18v D.C. power input, external antenna connector.
 
 

Product_Overview_LNK.png